Gorilla Clear Grip Contact Adhesive, 3 Oz, Clear
- Bonds metal, glass, fabric, wood, ceramic, and more
- Fast-acting: holds in just seconds
- Crystal clear, flexible, paintable, and waterproof
- Creates a strong permanent bond
- Includes 1 tubes of adhesive
Directions:
All surfaces should be clean and free of dirt, grease, and oil. Best if used between 50°f and 90°f. The clear grip should only be used in a well-ventilated area.
1. Apply adhesive to each surface to be bonded. To maximize bond strength: wait approximately two minutes for adhesive to partially dry before joining surfaces.
2. Press surfaces firmly together. Note: bond forms immediately and can be difficult to reposition.
Cure time: allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces. Storage
Tips: After each use, wipe the nozzle with a dry cloth and tightly replace the cap. Store in a cool, dry location.
Tip: for easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing the cap. Store away from children and animals.
Clean-up: wipe uncured adhesive with a dry cloth and clean with acetone, ISOPROPYL alcohol, or citrus based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface. Paintable when fully cured.
